Easy Flo- Resin
Easy Flo- Resin
Super low viscosity casting resin. Low viscosity equates to easy mixing, excellent detail penetration, and the most bubble-free castings without employing vacuum degassing and pressure casting techniques.
Easy Flo 60, is an outstanding 1:1 (by volume), white, polyurethane plastic with the lowest mixed viscosity available. Demold time: 15-30 minutes, Mixed viscosity: 60cP, Color: White, Shore Hardness: D65.
Easy Flo 90, 5 minute working time, 20-60 minute demold time; off white. Demold time: 60-120 minutes, Mixed viscosity: 200cP, Color: Off-White, Shore Hardness: D70.
Easy Flo 120, Similar to EasyFlo 60, but designed for rotocasting, slush casting or lay-up applications where lightweight, hollow castings are needed. Demold time: 15-30 minutes, Mixed viscosity: 120cP, Color: Off-White, Shore Hardness: D65.
Easy Flo Clear, Great for casting with metals and other colors. Has a slight amber tint. Demold time: 15-30 minutes, Mixed viscosity: 110cP, Color: Amber, Shore Hardness: D72.
Polyurethane Casting Resin
Every detail, bubble-free
A super-low-viscosity polyurethane casting resin for clean reproductions - easy 1:1 mixing, excellent detail penetration, and largely bubble-free castings without vacuum degassing or pressure casting.
Specifications
Compare the formulas
Easy Flo 60
WhiteThe lowest mixed viscosity in the line - the go-to for crisp, bubble-free detail.
Easy Flo 90
Off-whiteAbout 5 minutes of working time - more open time before it sets up.
Easy Flo 120
Off-whiteBuilt for rotocasting, slush casting, and lay-up - hollow, lightweight parts.
Easy Flo Clear
Amber tintA slight amber tint - made for casting with metal powders and other colors.
Frequently asked
What is the mix ratio for Easy Flo resin?
Every Easy Flo formula mixes 1:1 by volume. The low mixed viscosity makes blending easy and helps the resin flow into fine detail.
Do I need a pressure pot or vacuum chamber?
No. The super-low viscosity gives easy mixing, excellent detail penetration, and largely bubble-free castings without vacuum degassing or pressure casting techniques.
Which Easy Flo formula should I choose?
Easy Flo 60 is the general-purpose pick with the lowest viscosity. Easy Flo 90 offers more working and demold time. Easy Flo 120 is made for rotocasting, slush casting, and lay-up where hollow, lightweight castings are needed. Easy Flo Clear has a slight amber tint and suits casting with metals and other colors.
How long until I can demold a casting?
It depends on the formula: roughly 15-30 minutes for Easy Flo 60, 120, and Clear, and 60-120 minutes for Easy Flo 90.
What sizes is Easy Flo available in?
Easy Flo is stocked in 3.8 lb, 15.2 lb, and 76 lb sizes. A 14.8 lb option is listed as well but is currently unavailable.
Can I cast with metal powders or add color?
Easy Flo Clear, which carries a slight amber tint, is designed for casting with metals and other colors. Pair it with coloring agents to tint your castings.
Couldn't load pickup availability
Share
